Видео

Nice video guys 👌

Pretty good simplification of the current state of RTK. I've been using RTK for almost 30 years, have built and operated an RTK network, train people on how to use it and help develop standards for its use with a major state DOT. Your distance error statement was not correct in my opinion, at least for this level of discussion. In my opinion, you should simply have described the distant dependent error. Saying it is good or not at a range depends on the precision/accuracy needed, and that varies. RTK is entirely appropriate at 50im, for certain applications (single or multi-band) Single band RTK isn't just limited to 10km, It has more to do with the integer ambiguity (described) and often having to fix over a known point. Multiband RTK has near instantaneous 'fix' and can better correct for ionospheric error, which does impact the distance dependent error, but not by much for RTK. This is a good quick description overall, and one that I would use if I were to put it in context.

👍

hola, aca de Chile, sorry pero no hablo ingles. consulta, emlid es un producto Chino que se ve de buena calidad. Por que no hacer un video de medicion de distancia en paralelo usando los gnss de alta categoria como un trimble R12, Leica y Topconm pero al unisono, no en tiempos distintos ya que dia a dia los efectos ionosfericos y actividad solar varia y eso hace que ina medicion de un dia a otro varie unos milimetros, al mismo tiempo esas disferencias no se ven afectadas ya que actuan igual a los 3 receptores y asi sacar una estadistica de precision entre los 3 y asi validar la calidad de este producto. Siempre uno es medio reacio a valores entregados por un producto Chino pero creo que este video de prueba sacaria de muchas dudas a usuarios que estamos pensando adquirir un producto emlid. Ojala estas palabras sean tomadas en cuenta. Muchas gracias. Andres Toral from Chile-Geomensor

Hi there, I have followed this instruction, but just did not work, maybe because my reach base does not connect to internet? since I connect the reach base and emlid flow through my phone, and my phone have an active internet connection, does it mean my reach base also have active internet connection? or I have separately activate the reach base internet connection via slot sim card and activate the internet?

Great pruducts, I have used Emlid RS and RS2 in all my jobs and research.

congratulations

There is a lot of trigger missing problem happens in the E-mlid M2, When we complaint about the small to imlid- they simply act as they have never heard this issue before while the issue is being all over the internet if you search for and so far there is no solution for the same. We had potential financial loss due to this issue because the data simply cannot use. Planning to switch as they dont have a plan to fix it.

I hope next update is removable battery

Felicitaciones por estos 10 años!!

can reach v3 collect automatically per every specified distance or time

looks like there are other low cost alternatives than Reach!

I already connect the rover and base but its shows that "no data"

So im trying to understand. You setup the base on a known GPS point in an area with no NTRIP. Your base essentially turns into an station for your rovers and since your base and rover are connected to the same network, the corrections are through the internet connection and you can be fairly far from the base. Or in the case youre in an area where you have to pay to connect to the CORS stations, this would bypass the need to pay that fee. I live in Florida so I pretty much have NTRIP everywhere I go for free through FDOT.

Hello, I couple of questions: 1. Is an account with Emlid needed to run Emlid Flow? 2. Do you need to first setup the RS3 as shown in the "Reach RS3 first start" video before connecting to your iOS phone Hotspot as shown in this video? We have been trying to follow the instructions on Emlid's page to setup or RS3 for a few months now with no success. Our intention is to use it with NTRIP protocol and use it as a base for a DJI M3 Enterprise as well. Your help will be really appreciated as it's getting a little frustrating no being able to use the unit. Thank you.

S22 supports carrier phase if I am not mistaking. RTCM messages can be received from any free nearby station. Is there nothing preventing my phone from achieving <10cm accuracy then?

MADE IN RUSSIA 🤮😵‍💫😱☠️😈😡😤

👍

Ine k henning

hi is my fist time with Emlid but no with GNSS, is not necessary make enveloping network for this survey? in the other branch if necessary.

Do you have a written workflow to this video?

Hi, does this process work the same for emlid reach RX? Thank you

What tripod do you use/recommend?

Can you like have an rtk drone to aid the rover and base when its hard to find signal because of say vegetation?

Does this require a base station to use?

Promo sm 😕

what is the password for emlid

Thanks for making this video guys

Tutte cazzare

💪🦫

struggling to get this to work. It wont connect to my wifi network, netwrok name and password are correct. security is WPA2.. tried multiple wifi's not sure what to do??

WHAT´S THE MAXIMUM DISTANCE TO MAKE THE BASE SHIFT?

HOW MUCH PLEASE

The RS+ is single-band rubbish. It might work OK if you are surveying in the desert where there are no trees or buildings, otherwise it is impossible to get a useful set of data points in any reasonable amount of time. Do not waste your time with this product. It serves no useful purpose other than to take your money.

The RS+ is single-band rubbish. It might work OK if you are surveying in the desert where there are no trees or buildings, otherwise it is impossible to get a useful set of data points in any reasonable amount of time. Do not waste your time with this product. It serves no useful purpose other than to take your money.

Please create a THOROUGH CORRECT REAL WORLD EXAMPLE of Localization. I.e. bring a DXF CAD file in and Localize using Control Points and elevation 😊

Is there any way to communicate with this software via API? Where, through parameters, can I send the base and rover data and it returns with the corrected data?

Such a great tool. Can you guys let users decide to tag TIFF or RAW formats too?

Doesn't say much.. gloss over many details!

All the license "professional" surveyors that I hired and personally witnessed stake out a worksite using just the carry around one... I would always double checking their work measuring physicals tools it has always been off by a whole six inches to a foot no matter who I hired. Now watching this video and knowing that none of them use proper equipment to give us accurate information I am fuming at how much money was wasted paying those lazy cheap frauds. Should/can I sue them?

Não consigo conectar no iPhone 13

does it have a built in COGO?

does reach rs2+ have tilt IMU ?

Kindly make a video on how to use Emlid studio to post process static observation data. Thank you.

no contesta el soporte de emlid

If the relative position of the base station is offset to the north, will the rover's relative position also always be offset to the north with the same offset length?

Wonderfull!

Hi, have a Emlid Flow possibility work with surfaces and road alignment?

Hi, what is the accuracy difference using only one Emlid SR2+ as a rover with RTK via NTRIP (with wifi cellphone) vs one SR2+ as a rover and another one as a base like in the video ?

The Calculated shift shown as the title slide/ frame for the video, and also seen at ruclips.net/video/PYw67TtYQXU/видео.html in the video, shows a shift in the northing of 7.8241 m, but shouldn't it be 50,000,007.824 m ? There's also the unexplained bits at ruclips.net/video/PYw67TtYQXU/видео.html why the video is showing a local coordinate system for the known point, and then at ruclips.net/video/PYw67TtYQXU/видео.html the measured point is in SRB_ETRS89. This should be explained or corrected.